
Cut-Off Wheel, .025" 36 Pk
Skil Tools # 409
For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Minimize or Learn More more... |
Dremel Carbide Grout Removal Bit, 1/8"
Dremel # 570
Easily remove both wall and floor grout. Use with Advantage Grout Removal Attachment #962-01. A high-speed cutter with a 1/8" steel shank. Minimize or Learn More more... |
Dremel Cut-Off Wheel, .040"
Dremel # 420
For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Minimize or Learn More more... |
Dremel Cut-Off Wheels, 1 1/4"
Dremel # 540
Ideal for cutting, grooving and trimming all kinds of metal. May also be used on other materials-including thin wood, plastics and ceramics. Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver. May also be used on other materialsÃ’including thin wood, plastics and ceramics. Minimize or Learn More more... |
Dremel Drywall Bit
Dremel # 6339923
Makes fast, clean cuts in drywall for electrical boxes and air vents. Do not run in excess of 30,000 RPM. Minimize or Learn More more... |
Dremel Multipurpose Cutting Bit
Dremel # 561
Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. A high-speed cutter with a 1/8" steel shank. Minimize or Learn More more... |
Dremel Reinforced Cut-Off Wheels
Dremel # 426
For slicing and cutting metals. Also can be used on plastic and wood. Minimize or Learn More more... |
Dremel Tungsten Carbide Cutter
Dremel # 6200554
Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. A high-speed cutter made of tungsten carbide, the hardest material next to diamonds. Minimize or Learn More more... |
Carbide Grout Removal Blade
Fein Power Tools # 6-35-02-118-01-6
Carbide tipped segment saw blade. For cutting out grout or damaged tile joints and for cutting grooves in plaster, porous concrete and similar construction materials. Minimize or Learn More more... |
Cut Off Wheel Accessory Pack, 7 Pc
Gyro Precision Tools # 61-11817
Designed to work in conjunction with Dremel type motor tools and with our GyrosGuard Safety Shields. These kits provide you with an array of cutting accessories in one convenient package. The multi purpose combinations, combined with the GyrosGuard Safety Shields, provide quick and easy choices with proven performance. Kit Includes: (1) Fine-Teeth Saw, 1-1/4" Diameter; (1) Coarse-Teeth Saw, 1" Diameter; (1) Ripsaw, 7/8" Diameter; (1) Fiber Disk LT, 1-1/2" Diameter; (1) Fiber Disk HT, 1-1/2" Diameter; (1) Fiber Disk ST, 1-1/2" Diameter; (1) Mandrel, 1/8" Shank (#80-18100)(409.4447). Minimize or Learn More more... |
Cut Off Wheel Accessory Pack, 7 Pc
Gyro Precision Tools # 61-11807
Designed to work in conjunction with Dremel type motor tools and with our GyrosGuard Safety Shields [387.4906 & 390.4422]. These kits provide you with all three formulations of our Fiber Disks in an array of sizes; all in one convenient package. The multi-purpose combinations, combined with the GyrosGuard Safety Shields, provide quick and easy choices with proven performance. Kit Includes: (1) Fiber Disk LT, 1" Diameter; (1) Fiber Disk LT, 1-1/2" Diameter; (1) Fiber Disk HT, 1-1/2" Diameter; (1)Fiber Disk HT, 2" Diameter; (1) Fiber Disk ST, 2-1/2" Diameter; (1) Mandrel, 1/8" Shank - Fits 1/8" Arbor Holes (#80-18100) (409.4447); (1) Mandrel, 1/8" Shank - Fits 1/4" Arbor Holes (#80-18105). Minimize or Learn More more... |
Diamond Blade For Floor Tile
Rotozip # RZDIA1
Use for cutting floor tile, concrete, stone, ceramics, tile and other building materials. Maximum RPM 20,000. Use with ZIPMATE spiral saw attachment (ZM2). Minimize or Learn More more... |
Diamond Cut Off Wheel
Dremel # 545
For cutting, sawing, carving, sharpening and filing hard materials including marble, concrete, brick, porcelain, ceramics, hard epoxy, soft and hard wood. Long lasting, does not break, will not lose it's shape. Smooth, fine cut. Coated with fine diamondparticles. Hole design to minimize heat buildup. Packaged with No. 402 mandrel. Minimize or Learn More more... |
Dremel Carbide Cutting Wheel
Bosch #
|
Dremel Grout Removal Blade, 1/8"
Bosch # MM500
The grout blade is designed so that the blade can remove all grout up to the surface of a wall or corner. Diameter: 2-1/2 Inches. NOTE: Before selecting a grout blade measure the grout line width to pick the appropriate blade. Use with 122.5929. APPLICATIONS: Removing Grout Joints From Wall Tiles Repair; Remodeling & Restoration Work. Minimize or Learn More more... |
Dremel High Speed Carbide Cutter, 1/4"
Dremel # 9931
High-speed cutter with teeth made of tungsten carbide. Use for fast material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard, soft metals and ceramic wall tile. Minimize or Learn More more... |
Dremel High Speed Rotary Wheel Point Cutter, 3/16"
Dremel # 7123
A high-speed cutter steel tipped with diamond particles for fine detail work. USES: Wood, jade, ceramic, glass, hardened steel and other hard materials. Removes material quickly and easily. For curved surfaces. Minimize or Learn More more... |
Dremel Rigid Scraper Blade
Bosch # MM600
Large area removal and harder materials such as vinyl flooring, carpeting and tile adhesives. Use with 122.5929. APPLICATIONS: Removal of Vinyl Flooring & Bonded Carpeting; Scraping off Coats of Paint/Varnish or Adhesives. Minimize or Learn More more... |
Dremel Tile Cutting Bit
Dremel # 562
High-speed cutter mounted on a 1/8" steel shank. USES: Shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. Create decorative wall tile by cutting a design, such as a sailboat, and filling it with colored grout. Minimize or Learn More more... |
Dremel Wood & Drywall Saw Blade, 3"
Bosch # MM450
The Wood & Drywall Saw Blade works best on softer woods such as pine. For harder woods the blade life will be limited. Blade Diameter: 3 Inches. Use with 122.5929. APPLICATIONS: Cutting Openings in Flooring for Venting, Repairing Damaged Flooring & Cutting Openings for Electrical Boxes; Window Restoration to Remove Glazing. Minimize or Learn More more... |
Dremel Wood & Metal Flush Cut Blade, 3/4"
Bosch # MM422
Flush cut blades are used to make precise cuts and plunge cuts. Depth of Cut: 3/4 inch; Width: 3/4 inch. Use with 122.5929. APPLICATIONS: Non Ferrous Metals, Wood, Plastic, Drywall & Other Soft Materials. Flush Cutting Door jamb or Window sill, Flooring or Tile installation, Sawing Off Copper Water Pipes. Minimize or Learn More more... |