Order online or call 800-431-2712
Compound Miter Saw with Laser, 10"
Hitachi Power Tools # C10FCH
$219.99
Laser marker system for increased cutting accuracy. Horizontal handle with soft, vibration reducing elastomer grip adds comfort and control. Large table, large extended fence, raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed to greatly prolong the life of the tool. Dust collector attachment, to minimize airborne particles. STANDARD EQUIPMENT: 10" TCT saw blade, extended fence, dust bag, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench. SPECIFICATIONS: Single-phase 120VAC 60Hz 15 Amp motor 0-52 degree miter angle range, to the right and left 0-48 degree bevel angle range, to the left with adj accuracy. Horizontal handle with soft, vibration reducing elastomer grip adds comfort and control. Large table, large extended fence, raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed to greatly prolong the life of the tool. Dust collector attachment, to minimize airborne particles. Minimize or Learn More more... |
Compound Miter Saw, 12"
Dewalt # DW715
$359.99
Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Adjustable miter saw laser system delivers visibility to the cutting path. Lightweight with built-in carry handle for easy portability. STANDARD EQUIPMENT: C plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Adjustable miter saw laser system delivers visibility to the cutting path. Lightweight with built-in carry handle for easy portability. SPECIFICATIONS: 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs. tool weight. Minimize or Learn More more... |
Compound Miter Saw, 12"
Makita USA # LS1214FL
$759.99
Powerful, direct drive 15-amp motor never slips or bogs down. Built-in laser with micro fine adjustments clearly indicates line of cut. Independent switch allows laser to be seen independently of blade rotation. Built-in high output fluorescent light illuminates work area and lasts 2,000 hours on average. Dual steel rails supported by linear ball bearings. 9-positive stops at 15,22.5, 30, 45-degree left or right and 0-degree for the most common miter cuts, additional positive stops at 33.9 degrees left. Electronic speed control maintains constant speed under load, soft start feature for controlled operation. Single cast aluminum base has built-in wrench storage.Long slide track and wide pivot angle allow cross cuts up to 4 x 12 material. Large turn base and adjustable pivot fencee supports larger stock. STANDARD EQUIPMENT: No.A-94443 12" x 70T carbide-tipped blade, No.122540-9 vertical vise, No.122523-9 dust bag, 2 No.322932-4 extension wing, No.153898-5 sub-fence (right), No.762001-3 triangular rule, No.782212-4 socket wrench #13. SPECIFICATIONS: 12" blade, 15-amps, 1" arbor, 3,200 no load RPM. 28-1/2Length x 20-1/2Width x 28-1/4"Height. 52.9 lbs. tool weight. Minimize or Learn More more... |
Dewalt Compound Miter Saw, 10"
Dewalt # DW713
$259.99
Two-piece aluminum and Lexan guard design protects against side impact. Lexan allows user to see the blade without the glare, providing a clean line of sight. Base handle design delivers increased comfort and portability to the end user. Positive bevel stops, cam lock miter handle, adjustable stainless detent plate and precise miter system. SPECIFICATIONS: 13 amp motor, 5,000 RPM, negative 3-degree to 48-degree bevel capacity, left and right miter capacity, machined base fence support, tall sliding fence and easy access bevel lock. Minimize or Learn More more... |
Double Bevel Compound Miter Saw, 12"
Dewalt # DW716
$469.99
Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree with positive stops at 0, 33.9, 45 and 48 degree both left and right allowing user to flip the saw not the material. Back fence design delivers ability to cut 2 x 10" dimensional lumber at 90 degrees and 2 x 8" at 45 degrees. Precise miter system and machined base fence support, innovative gearbox and belt-drive design for increased cutting capacity. Lightweight, head lock-down pine and built-in carrying handle. Cam lock miter handle withe) max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6" (2 x 8" with back fence) dimensional lumber max width for 45 degree miter cut capacity. 44 lbs. tool weight. Minimize or Learn More more... |
Double Beveled Sliding Mitre Saw, 12"
Dewalt # DW718
$809.99
Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench.SPECIFICATIONS: 15 amps, 3,600 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat, 2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber), 2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber), 16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Minimize or Learn More more... |
Dual Bevel Miter Saw with Laser, 10"
Bosch # 4410L
$619.99
Microfine miter adjustment knob for fine adjustment of key (detent) miter angles by up to 2 degrees, left or right. Multi-positioned main handle locks into any of four positions for optimum comfort and control. Large 21'' aluminum base with cast sliding extensions for 37-1/4'' total length provides extended grip areas and extra support for longer materials. Easy read bevel and miter scales; tall 4-1/2'' speed-track sliding fences for easy bevel set-ups and increased crown molding cutting capacities. Crown miter detents 31.6 degree miter and 33.9 degree bevel detents for quick, accurate crown cuts. Miter detent override holds miter detent lever away from table for free rotation or engagement of 'Microfine Miter' adjustment feature. Exclusive adjustment of key (detent) miter angles by up to 2 degrees, left or right. Multi-positioned main handle locks into any of four positions for optimum comfort and control. Large 21'' aluminum base with cast sliding extensions for 37-1/4'' total length provides extended grip areas and extra support for longer materials. Easy read bevel and miter scales; tall 4-1/2'' speed-track sliding fences for easy bevel set-ups and increased crown molding cutting capacities. Crown miter detents 31.6 degree miter and 33.9 degree bevel detents for quick, accurate crown cuts. Miter detent override holds miter detent lever away from table for free rotation or engagement of 'Microfine Miter' adjustment feature. Exclusive Minimize or Learn More more... |
Dual Bevel Mitre Saw with Laser, 12"
Bosch # 4212L
$449.99
Two 4-1/2'' x 11-3/4'' sliding fences with scales and ambidextrious lock-off release button. Four-position rotating handle; highly visible dual-bevel scales - 0-47degrees left and 0-46 degrees right; two sliding base extensions from 22-3/4'' to 37-1/4''.Upfront bevel range selector knob plus wide miter range, 52 degrees left, 52 degrees right. Upfront bevel lock lever with built-in flip storage crown stops. STANDARD EQUIPMENT: 40-tooth thin-kerf carbide-tipped blade, Dust bag and elbow wrench set, Pivot housing cap features wrench storage. SPECIFICATIONS: Amperage 15.0, Voltage 120V, No Load RPM 3,800, Max. Motor HP 3.0, Blade Diameter 12, At 0 miter/45 left bevel 1-5/8'' x 7-7/8'' (2x8), At 45 miter/ 0 Bevel 3-7/8'' x 4-1/2'' (4x4), Crown Molding Angled Against Fence 5-1/4'', Crown Molding Laying Flat 6-5/8'' using 3.16 degree miter and 33.9 degree bevel. Minimize or Learn More more... |
Dual Bevel Slide Miter Saw with Laser, 12"
Bosch # 4412
$789.99
Upfront bevel lock lever and range selector knob. Multi-position main handle. Large 25-1/2'' base with built-In cast sliding extensions for 40'' total length. Tall 4-1/2" speed-track sliding fences with built-in length stop. Easy read bevel and miter scales and exclusive wedge-and-slot miter detent system. Exclusive Wedge-and-Slot Miter Detent System - Consistent and precise miter angles over the life of the tool Crown Miter Settings - 31.6 degree miter and 33.9 degree level detents for quick, accurate crown cuts. Miter detent override for easy, precise setting of any neighboring angle. Electric Brake for quick, repetitive cuts. Stops blade in seconds. STANDARD EQUIPMENT: (1) Premium 60-Tooth Thin-Kerf Carbide-Tipped Blade, (1) Wrench Set ,(1) Tool-Free Vertical Work Clamp, (1) Dust Bag. SPECIFICATIONS: Amperage 15, Voltage 120V, No Load RPM 3,800, Max. Motor HP 3.0, Blade Diameter 12'', Arbor Size 1'', Height 20'', Weight (lbs.) 59, Bevel Angle Range 47 degrees to 47 degrees, Miter Angle Range 52 degreesLeft / 60 degrees Right, Bevel Detent 0 degrees, 33.9 degrees, 45 degrees left/Right, At 0 bevel/0 miter 4-1/2''x 12'', At 0 miter/45 left bevel 2-3/4'' x 12'', At 45 miter/ 0 Bevel 4''x 8-1/2'', At 45 miter/45 left bevel 2-3/4''x 8-1/2'', Base Molding - Against Fence 4-1/4'', Crown Molding - Angled Against Fence 6'', Crown Molding - Laying Flat 10-1/4'' Molding - (90 degree corner when molding has a 38 degree 'spring' angle from wall) using 31.6 degree miter an Minimize or Learn More more... |
Hitachi Compound Miter Saw with Laser, 12"
Hitachi Power Tools # C12LCH
$389.99
Digital display panel indicates miter/bevel angles. Laser guide system for easier alignment with ink line. Horizontal handle with soft, vibration reducing elastomer grip for comfort and control. Large pivoting fence raises fence height to 5-1/8" for cutting crown molding vertically. Thumb activated positive stops for quick miter adjustments. Carbon brush access allows user to replace brush as needed. STANDARD EQUIPMENT: 12"TCT saw blade No.726100, dust bag No.322955, vise assembly No.322957, 17mm box wrench, 4mm box wrench. SPECIFICATIONS: 15-Amp motor, 120 Volts, 4,000 RPM no load speed, 12" blade, 1" arbor, 0 to 52 degree miter range, right and left. -3 to 48 degree bevel cutting range. 0, 15, 22.5, 31.6, 45 degree angle stopper positions. WORKPIECE CAPACITY: 2-1/2" x 7-7/8" cross cut at 0 degree, 3-7/8" x 6-1/8" right angle, 2-1/2" x 5-1/2" miter right/left cut at 45 degree, 2-1/2" x 4-3/4" miter right/left cut at 52 degree, 1-5/8" x 7-7/8" bevel left cut at 45 degree. 1-5/8" x 5-1/2" compound cut at 45 x 45 degree. 24"H x 24-5/8"W x 30-1/2"L. Minimize or Learn More more... |
Hitachi Compound Miter Saw, 10"
Hitachi Power Tools # C10FCE2
$179.99
Lightweight and aggressive tool design with has a powerful motor and large table for increased material stability. Thumb actuated positive stops. Adjustable pivot fence for suppporting large stock. Dust guide to prevent chips from scattering. Soft and vibration-reducing grip. Spindle lock for easy blade replacement. Laser guide system for easier alignment with the ink line. STANDARD EQUIPMENT: TCT saw blade, dust bag, vise assembly, sub fence, wrench. SPECIFICATIONS: 10" blade diameter, 1/520W, 1,950W max. output, 5,000 RPM. 110V-120V: 15A, 220V: 7.5A, 230V: 7.2V, 240V: 6.9A full load current. 5/8" bore size for USA/Canada. Max. cutting capacities: cross cut 0-degree (right angle), miter cut 45-degree, bevel cut 45-degree to teh left, compound cut 45 x 45-degree. Right and left 0-52-degree miter cutting ranges, 0-45-degree left bevel cutting range. Miterr: right and left 0-45-degree/Bevel: left 0-45-degree compound (miter plus left bevel cutting ranges. Angle stopper positions: right and left 0,15, 22.5, 31.6, 45-degree. 18-1/8"W x 24-3/4L x 22-3/32"H. Minimize or Learn More more... |
Laser Marker Miter Saw, 10"
Hitachi Power Tools # C10FSH
$599.99
12 AMP belt driven motor with soft start and overload protection. Adjustable laser guide for precise cutting. Soft Start feature reduces noise and recoil during start-up. Electronic speed control keeps RPMs constant as load varies. Linear ball bearing slide system for precision and durability. Left and right positive stops on miter gauge located at 0, 15, 22.5, 31.6, and 45 degrees. Dust collection system collects 100% more dust than previous models. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 10 mm box wrench, and vice assembly. SPECIFICATIONS: 12 AMP belt driven motor, pivoting fence, no-load speed of 3,800 RPM. Minimize or Learn More more... |
Light Weight Miter Saw, 10"
Makita USA # LS1040
$219.99
Lightweight with lockdown motor head and carrying grip for easy transporting and 2 holes for bolt mounting to bench. Electric brake for fast stopping of blade. Easy blade changes with shaft lock and Makita socket wrench. Depth adjusting bolt compensated for reduction of blade diameter from sharpening. Dust bag makes cutting clean and dust collections easy. Dual post cutting arm for durability. Switch trigger and lock-off button for safety. STANDARD EQUIPMENT: Includes No.782212-4 socket wrench, 10"diameter No.792641-3 crosscut blade with 5/8" arbor, No.122523-9 dust bag, No.122540-9 vertical vise, and No.762001-3 triangular rule. SPECIFICATIONS: 15-amp/115-Volt motor (4,600 RPM no load). Miter cuts 0 to 45 degrees left and 0to 52 right. 9 positive stop settings: 15, 22.5, 30, or 45 degrees (right/left), and 0 degrees (90 degree cuts). Weighs about 24.3 lbs., 18-1/2"L x 19-1/8"W x 20-1/16"H overall. WORKPIECE CAPACITY: Factory adjusted for max cut capacity with 10" blade. Cuts 2-3/4" material 5-1/8"W at 90 degrees, 3-5/8" at 45. Minimize or Learn More more... |
Miter Saw with Laser Guide, 12"
Hitachi Power Tools # C12LSH
$729.99
Powerful 15-amp motor has an aggressive tool design and compact body. Display panel indicates miter/bevel angles. Laser guide system for easier alignment with ink line. Soft and vibration-reducing grip with spindle lock for easy b lade replacement. Beveland miter angle fine adjustment. Positive angle stoppers for easy adjustment of turn table position for miter cutting. Conveniently positioned bevel angle locking mechanism. 120mm high sub fence supports workpiece widely for stable cutting. High dust collecting performance. Splinter/Dust guide prevents chips from scattering. STANDARD EQUIPMENT:305mm TCT saw blade, dust bag, vise ass'y, 17mm box wrench, holder. SPECIFICATIONS:12-amp motor, 4-3/16" x 12-1/4", 4-11/16" x 10-3/16"left 45-degrees to right 31-degrees + left level 0-degrees to 45-degrees, Miter left 31-degrees to right 45-degrees + right level 0-degrees to 45-degrees Compound (miter + bevel) cutting ranges. Right and left 0, 15, 22.5, 31.6 and 45-degrees. 15A/120V, 3,800/min. no-load rotation speed, Approx. 1,850 W max. output. 23-7/16"Width x 36-5/8"Length x 27-15/16"Height. 66.1 lbs. product weight. Minimize or Learn More more... |
Sliding Dual Compound Miter Saw, 10"
Hitachi Power Tools # C10FSB
$569.99
Positive angle stoppers for easy adjustment of teh turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight. Minimize or Learn More more... |
